Aerodynamics
Aerodynamics
−0 Cd
Closed-face profile streamlines airflow around the wheel.
Protection
Protection
A sacrificial barrier against curb rash, salt, and gravel.
Install
Install
0 sec
No tools, no shop visit.
Patented
Patented
US 11,XXX
The only patent-protected retention system.

"Closed wheel covers are mandated across every Formula 1 grid since 2022 — to reduce turbulence and increase overtaking. Aerodisc is the same engineering, built for your driveway."

FIA Technical Regulations · Article 10.3 (2022)
Airflow visualization around a closed-face Aerodisc wheel Aerodisc
Performance & Efficiency

Less Drag.
More Range.

A closed-face profile streamlines airflow around the wheel, smoothing the turbulence that exposed spokes create. The result: up to 10% more range per trip, a smoother ride at speed, and a noticeably quieter cabin — even in crosswinds.

Up to 10% range saving observed in specific high-speed crosswind conditions. Real-world results vary with speed, yaw angle, tires, and road surface.

Why Aerodisc

Engineered to Outlast the Road.

A wheel cover rated for the track, not just the street — protecting what's underneath, hiding what's already there, fitting every Tesla you can drive home, and built from materials that take the worst the road can throw at them.

Rated for the Track.360° Rim Protection.Hide What’s Already There.Fits Every Tesla.Built from the Right Stuff.
Rated for the Track.
01

Rated for the Track.

Where others cap out at street speed, Aerodisc keeps going. The patented center-lock clamps the cover to the hub itself — so it stays planted through hard cornering, heavy braking, and sustained high-speed running. Take it to the circuit, not just the commute.

360° Rim Protection.
02

360° Rim Protection.

A continuous outer ring wraps the rim’s most vulnerable edge — taking curb strikes, parking-lot scrapes, gravel, and road salt so your OEM finish never does. The cover is the sacrificial layer; the wheel stays factory-fresh.

Hide What’s Already There.
03

Hide What’s Already There.

Already curbed your rim? Aerodisc covers existing scratches, chips, and corrosion in seconds — no refinish shop, no $400 repair, no waiting on parts. From the day it snaps on, the wheel looks new again.

Fits Every Tesla.
04

Fits Every Tesla.

Engineered for Model 3, Model Y, Model S, and Model X — across 18", 19", 20", and 21" OEM wheels. One product line, validated against every factory rim Tesla ships, with a precise center-bore match (51–52 mm) for a flush, factory-tight fit.

Built from the Right Stuff.
05

Built from the Right Stuff.

High-impact ABS + PC composite with a UV-stabilized matte coating — the same material class used for automotive bumpers. Rated −40 °F to +120 °F, pressure-wash safe, and color-fast under direct sun.

Patented center-lock retention mechanism
USPTOProtected
Patented · Protected

Patented Locking Technology

US 11,XXX,XXX

Others rely on generic clips. We rely on patented engineering — the only patent-protected wheel cover retention system on the market. Owner-only removal. Rock-solid at every speed. Backed by USPTO.

Aerodynamics

Less Turbulence.
Less Drag.

CFD comparison: Aerodisc vs. exposed wheels.

CFD comparison — Aerodisc closed face vs. exposed wheel airflow
CFD · Airflow comparison
Exposed wheels — turbulent wake, higher drag With Aerodisc — up to 10% energy saved
01

Smooth, closed face calms wheel-well turbulence.

02

Tighter rear wake lowers overall drag.

03

At speed: better efficiency and stability.

Note: Up to 10% saving in specific high-speed crosswinds; results vary by speed, yaw, tires, road.

Aerodisc snap-on install in 30 seconds
Installation

Snap On.
30 Seconds.

  1. 01
    Align the cover. Line up the center-lock over the hub — no lugs removed.
  2. 02
    Press once. An audible click confirms the lock; no tools, no scratched OEM paint.
  3. 03
    Drive. Owner-only release with the keyed center-lock tool (included).

Recommended to remove before tire inflation or rotation; reinstall takes the same 30 seconds.

What's in the Box

One Box. Everything You Need.

A complete install kit — wheel covers, retention hardware, the keyed tool only the owner gets, and the protective gear that keeps your rim factory-fresh from the very first turn.

01
Aerodisc Wheel Cover
Qty 4
Aerodisc Wheel Cover
02
Center-Lock Retention Ring
Qty 4
Center-Lock Retention Ring
03
Hub Insert (Vehicle-Specific)
Qty 4
Hub Insert (Vehicle-Specific)
04
Patented Center-Lock Tool
Qty 1
Patented Center-Lock Tool
05
1/4″ Hex Key
Qty 1
1/4″ Hex Key
06
Removal Hook
Qty 1
Removal Hook
07
Anti-Slip Install Gloves
Qty 1 pair
Anti-Slip Install Gloves
08
Rim Protective Tape
Qty 1
Rim Protective Tape
Heritage

100 Years of Closed Wheels.

From the 1924 Bugatti center-lock that won Le Mans to the 2022 FIA mandate that put closed wheels back on every Formula 1 grid — the story Aerodisc inherits.

1924
Bugatti Type 35
The first center-lock hub on a racing wheel cuts pit-stop tire changes from five minutes to under one — and wins Le Mans the same season.
1936
Cadillac & Packard
Polished-chrome hubcaps become the first piece of "moving jewelry" on American luxury — a status symbol you could see at a city block away.
2022
FIA Closed Wheels
Formula 1 mandates closed wheel covers across all teams — a regulatory acknowledgment that closing the wheel lowers turbulence and increases overtakes.
2026
Aerodisc Series II
The first civilian closed-face wheel cover protected by a USPTO-issued retention patent — and the first with an interchangeable face program for every season.
Watch

See It in Action.

A 60-second installation guide and a deeper review from the creators who put Aerodisc through its first thousand miles.

FAQ

Questions, Answered.

The most-asked questions about fit, finish, install, and the patent. Tap any row to expand.

Aerodisc fitted on a Tesla
Aerodisc currently fits Tesla Model 3, Model Y, and Model S. Sizes 18", 19", 20", and 21" are supported with center-lock variants for each. Check the configurator at the top of the page for your exact match.
Yes — the patented center-lock retention is independently tested to 155 mph and through 10,000+ on-off cycles. Sustained highway cruising is exactly what the system is engineered for.
No. Aerodisc mounts through the wheel’s existing center bore and brake-shield channel — there are no drilled holes, no adhesives, and no contact with painted or anodized surfaces.
First time, about two minutes per wheel while you get used to the magnetic alignment. After that, 30 seconds per wheel is the norm. No torque wrench, no shop visit required.
Two-year retention warranty (covers the locking hardware) plus a one-time free face replacement if you damage the disc within the first year. Lifetime access to the seasonal swap program.
Yes. The polymer-aluminum composite is rated to −40 °F and shrugs off road salt. Many owners swap to dedicated winter Aerodisc faces (matte black or arctic camo) when they fit snow tires.
Center bore 51–52 mm and a minimum horizontal clearance of 35 mm. The hub insert is vehicle-specific — select your model + wheel size in the configurator at the top of the page and we’ll ship the matched insert.
Yes. The retention system is sealed and rated for direct high-pressure spray. Automatic and touchless car washes are both safe. No removal needed.
Replacement tools are keyed to your serial number and only ship to the registered owner of record. Order at no charge from your account dashboard — most ship within 48 hours.
The outer face is engineered to release before transferring force to the structural rim — a crumple-zone behavior that protects the alloy underneath. Aerodisc is not a crash-rated component; it’s a sacrificial layer designed to fail predictably so your wheel doesn’t.
@aerodisc · TikTok

Seen on TikTok.

Real owners. Real installs. Scroll the feed to watch how Aerodisc shows up in the wild.

@drivenina · 2.4M views
Install · 0:42
@evgarage · 880K views
Drive POV · 0:58
@cleanmoto · 1.1M views
Unbox · 1:05
@maemobility · 540K views
First Impressions · 0:36
@torquetalk · 2.0M views
Review · 1:24
@auto.aestht · 720K views
Color Swap · 0:48
Reviews

What Owners Are Saying.

Verified buyers across thirty-eight countries — pulled from the Aerodisc owner program.

4.8
★★★★★
Based on 2,341 reviews
5★82%
4★12%
3★4%
2★1%
1★1%
Quieter than expected.
★★★★★
Quieter than expected.

Took it from my driveway straight to the highway. Cabin noise drop is real — and the install was honestly under a minute per wheel.

Marcus L. Verified Owner
Best $300 mod I’ve made.
★★★★★
Best $300 mod I’ve made.

Range bumped about 8% on my daily commute. Got more compliments in a week than my entire ownership.

Priya N. Verified Owner
Beautiful, watch your wheels.
★★★★☆
Beautiful, watch your wheels.

Took me two tries on the first wheel to align. Once you’ve done one, the rest go in 30 seconds. Finish quality is top-tier.

Daniel K. Verified Owner
Held up on track day.
★★★★★
Held up on track day.

Ran a full track day and they never budged — not a single rattle. The center-lock is the real deal, exactly as advertised.

Sofia R. Verified Owner
Looks factory, better.
★★★★★
Looks factory, better.

People think it’s a Tesla performance option. Swapped to the blue face for summer in under five minutes. Zero regrets.

James T. Verified Owner
Pair With

Also Recommended.

Other Aerodisc accessories that complement the wheel covers. All ship from the same facility, all backed by the same warranty.

Center Cap Set
Accessory
Center Cap Set
$49★★★★★
Spare Face — Hex Carbon
Replacement
Spare Face — Hex Carbon
$129★★★★★
Seasonal Swap · Year
Subscription
Seasonal Swap · Year
$348/yr★★★★☆
Aerodisc Detail Kit
Care
Aerodisc Detail Kit
$39★★★★★